1000W DC to DC Power Converter

1000W DC to DC Power Converter nput voltage: 48-72VDC Output voltage: 12VDC Output current: 85A, Isolated design,

1000W DC to DC Power Converter 

 

Features:

Input and output isolated,

Advanced current control mode and stable circuit toplogy,

Main components used are imported. Important technical index is higher than related state standard.

Complete protections: overvoltage protection, undervoltage protection, overcurrent protection, overheat protection, shortcircui protection and input reverse protection.

Human oriented design, easy operation: no distinguishment between positive cable and negative cable of input.

Using high frequency switching tech makes the charger with higher efficiency,compact size and light weight.

By using a 45°C temperature detect switch on cooling fan, makes the fan no working when the temperature is under 45°C and start working when the temperature is over 45°C, which can reduce the noise and prolong the life of fan. The overheat protection of power converter is 65°C.

Operating Condition:

Compatible battery types: Lead-Acid, Lithium battery.Altitude: ≤1200mTemperature range: -10°C-+50°CHumidity: ≤90%Keep the power converter far from explosive&inflammable substances, aggressive gas or any gas or steam which may destroy the insulation of power converter. The operating area should be always dry and ventilated.Excessive vibration and impact to power converter is not allowed. The vertical angle should not be over 5%.

General Specifications:

1. High frequency insolated switching power supply:

Input voltage: 48-72VDC

Output voltage: 12VDC

Output current: 85A

Output ripple voltage(Peak-Peak value): less than 2V

Voltage rate: ≤1%

Full load efficiency: ≥92%

Temperature range: -20°C~60°C

Relative humidity: 30%~90%

Protection class: IP52

2. This power converter has a Softstart function, the input impulse current is less than 10A.

3. Protections: overvoltage, overcurrent, overheat, shortcircuit and input reverse.

1000W DC to DC Power Converter